微波功率计,射频功率计,Giga-tronics 8541C,8542C

• Frequency Range 100 kHz to 40 GHz, depending on sensor used
• Power Range: -70 to +47 dBm, depending on sensor used
• Choose from an extensive line of CW, Peak, Modulation and True RMS sensors
• Single Sensor Dynamic Range:
  • CW Power Sensors: 90 dB (-70 to +20 dBm)
  • Modulation Power Sensors: 87 dB CW, 60 to 80 dB Modulation Mode
  • Peak Power Sensors: 50 dB CW, 47 dB Peak
• Linearity: ± 0.02 dB
• Automatically measure average power of TDMA, GSM, and CDMA signals
• Optional Time Gating to program a measurement's start time and duration
• Achieve 500 reading per second over GPIB
• Use the Fast Buffered Mode to capture up to 4000 readings per second
• Measure the instantaneous peak power level of a pulse modulated signal
• 说明书下载

载波信号功率探头 80301A

• 频率范围 10 MHz to 18 GHz
• 功率测量范围 -70 dBm to +20 dBm
• 最大耐受功率 +23 dBm (200 mW)
• 功率线性度 -70 to -20 dBm: ±0.00 dB | -20 to +20 dBm: ±0.05 dB/10 dB
• 接口 Type N(m) 50 ohm
• VSWR : 1.12: 0.01-2GHz / 1.22: 2-12.4GHz / 1.29: 12.4-18G

调制信号功率探头 80401A

• 频率范围 10 MHz to 18 GHz
• 功率测量范围 -67 dBm to +20 dBm
• 最大耐受功率 +23 dBm (200 mW)
• 功率线性度 -67 to -20 dBm: ±0.00 dB | -20 to +20 dBm: ±0.05 dB/10 dB
• 接口 Type N(m) 50 ohm
• VSWR : 1.12: 0.01-2GHz / 1.22: 2-12.4GHz / 1.29: 12.4-18GHz

调制信号功率探头 80601A

• 频率范围 10 MHz to 18 GHz
• 功率测量范围 -67 dBm to +20 dBm
• 最大耐受功率 +23 dBm (200 mW)
• 功率线性度 -67 to -20 dBm: ±0.00 dB | -20 to +20 dBm: ±0.05 dB/10dB
• 接口 Type N(m) 50 ohm
• VSWR : 1.12: 0.01-2GHz / 1.22: 2-12.4GHz / 1.29: 12.4-18GHz

Modulated Average Power Measurement

1. The Giga-tronics 80400A Series Modulated Power Sensors let you measure the average power of amplitude modulated, burst modulated and other complex modulated signals, such as TDMA signals - at bandwidths up to 40 kHz. This sensor works with the 8540B, 8540C, 8650A, 8650B series power meters.
2. The Giga-tronics 80600A Series Modulated Power Sensors provide bandwidth up to 1.5 MHz to measure the peak and average power of CDMA signals. This sensor works with the 8540C, 8650A, 8650B series power meters.
3. The Giga-tronics 80701A Modulated Power Sensor provides system bandwidth up to 10 MHz to measure peak and average power of wide band, third-generation CDMA signals over an 80 dB range. This sensor works with the 8650A and 8650B – option 12 required (1 GHz calibrator) series power meters.

CW Power Measurement

Measure CW power from 10 MHz to 50 GHz at more than 17,500 readings per second over GPIB. Measure up to 90 dB with a single sensor, and select from a variety of high power sensors up to 50 W.

• 80301A Series Standard Power Sensor, +20 dBm to -70 dBm, 10 MHz to 18 GHz
• 80310A Series Low VSWR Power Sensor, +26 dBm to -64 dBm, 10 MHz to 18 GHz
• 80320A Series High Power Sensor, +30 dBm to +47 dBm (1W to 50 W), 10 MHz to 18 GHz
• 80330A Series True RMS Series Power Sensor, +20 dBm to -30 dBm, 10 MHz to 40 GHz
• 81305A Standard CW Power Sensor +20 to -50 dBm; 10 MHz to 50 GHz, 2.4 mm (m), for 8650B (Opt 12) only

These sensor groups work with the 8540B, 8540C, 8650A, 8650B and 58542 VXI series power meters and the 8003 Scalar Network Analyzer.

咨询电话: 132- 4173- 5460 , 邮箱: 52634729@QQ.com